Magnetic Field Probe×テイエスエスジャパン - メーカー・企業と製品の一覧

RF3 Mini Set (Magnetic Field Probe)

The direction and distribution of the magnetic field in the electronic assembly can also be detected!

The "RF3 Mini Set" includes two passive magnetic field probes with a resolution of less than 1mm and one dedicated cable. It is capable of measuring electric and magnetic fields from 30MHz to 3GHz on electronic assemblies during the development process. It comes with a specially designed compact head that allows for detailed measurement of magnetic fields and interference currents in layout and component ranges. 【Set Contents】 ■RF-B 0.3-3: H-Field Probe mini 30MHz–3GHz ■RF-R 0.3-3: H-Field Probe mini 30MHz–3GHz ■SMB-BNC: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC countermeasure products

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

SX-B 3-1 (H field magnetic field probe)

The current attenuation sheath provides strong electrical shielding!

We would like to introduce the "SX-B 3-1 (H field magnetic field probe)" that we handle. The internal coil is arranged perpendicular to the shaft, allowing for accurate measurements when the probe head is used vertically against the assembly or device being measured. Since the probe head is very small, it can be approached from above to access printed circuit boards and other components that are difficult to reach. It detects magnetic field lines radiating at a 90° angle from the object being measured, while it does not detect magnetic field lines entering from the side. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ4mm probe head ■ Frequency range: 1GHz to 10GHz ■ Connector: SMA female, Jack ■ Resolution: 2mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC countermeasure products

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

XF-R 100-1 (H field magnetic probe)

The XF series magnetic field probes have a built-in 50Ω termination resistor!

The "XF-R 100-1" magnetic field probe is a passive near-field probe designed to measure assemblies, devices, and cables up to 3 cm away. Its wide bandwidth and high linearity allow for the identification of large components that may cause interference. In terms of head size, sensitivity, and resolution, it offers performance that is intermediate between the "XF-R 400-1" and "XF-R 3-1" probes. 【Specifications】 ■ Type: Near-field probe ■ Size: 10x10mm probe head ■ Frequency range: 30MHz to 6GHz ■ Connector: SMA female, Jack ■ Resolution: Φ10mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

XF-R 3-1(H field magnetic field probe)

Ideal for measurements close to components with high magnetic field strength!

The "XF-R 3-1" magnetic field probe is a passive near-field probe. It directly detects RF magnetic fields on the assembly with high resolution, including IC pins, IC cases, conductive paths, decoupling capacitors, and surrounding areas of EMC components. It has the same basic structure as the "XF-R 100-1" and "XF-R 400-1" probes, but this product has a significantly higher resolution. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ3mm probe head ■ Frequency range: 30MHz to 6GHz ■ Connector: SMA female, Jack ■ Resolution: 1mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

RF-R 50-1 (H field magnetic field probe)

The larger head allows for the detection of larger components as potential sources of interference!

The "RF-R 50-1" magnetic field probe is a passive near-field probe designed to measure assemblies, devices, or cables located up to 3 cm away. The probe head of this product has a diameter of 10 mm, which results in lower sensitivity compared to the 25 mm diameter "RF-R 400-1," but it offers high resolution. It can be connected to a spectrum analyzer or oscilloscope with a 50Ω input. The RF series magnetic field probes do not have a built-in 50Ω termination resistor. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ10mm probe head ■ Frequency range: 30MHz to 3GHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

RF-R 3-2 (H field magnetic field probe)

Suitable for measurements close to components in high magnetic field strength!

The "RF-R 3-2" magnetic field probe is a passive near-field probe. It directly detects RF magnetic fields on the assembly with high resolution, including IC pins, IC cases, conductive paths, decoupling capacitors, and surrounding EMC components. It has the same basic structure as the "RF-R 50-1" and "RF-R 500-1" probes, but this product offers significantly higher resolution. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ3mm probe head ■ Frequency range: 30MHz to 3GHz ■ Connector: SMB male, Jack ■ Resolution: 1mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

RF-U 2.5-2 (H field magnetic field probe)

Can be connected to a 50Ω input spectrum analyzer or oscilloscope!

The "RF-U 2.5-2" magnetic field probe is a passive near-field probe designed to selectively detect RF currents in conductive paths, SMD components, and IC pins. The probe head features a magnetically active gap of approximately 0.5mm, allowing for direct placement on the measurement target for assessment. It has the same basic structure as the "RF-U 5-2," but is more suitable for detecting smaller areas. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ4mm probe head ■ Frequency range: 30MHz to 3GHz ■ Connector: SMB male, Jack ■ Resolution: 0.5mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

RF-K 7-4 (H field magnetic field probe)

Detecting the uneven magnetic field entering the probe head surface without detecting the magnetic field lines entering from the side!

The "RF-K 7-4" magnetic field probe is a passive near-field probe that detects semicircular magnetic field lines entering the probe head in the opposite direction. The semicircular magnetic field lines are generated along linear, rod-like structures, cable connectors, and the edges of planar structural components. The probe functions like a coupling clamp. It does not detect overlapping uniform magnetic fields. 【Specifications】 ■ Type: Near-field probe ■ Size: 6x10mm probe head ■ Frequency range: 30MHz to 1GHz ■ Connector: SMB male, Jack ■ Resolution: 5mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

LF-R 400 (H field magnetic probe)

The larger the tip diameter, the higher the sensitivity, allowing for the detection of a wider area of the magnetic field!

The "LF-R 400 Magnetic Field Probe" is a passive near-field probe with a head size of 25mm in diameter, featuring high sensitivity and suitable for measurements within a maximum range of 10cm around assemblies and devices. Langer's near-field probes are compact and very easy to use, and they are electrically well shielded due to the current-damping sheath. It can be connected to a spectrum analyzer or oscilloscope with a 50Ω input. The magnetic field probes in the "LF series" do not have a built-in 50Ω termination resistor. 【Specifications】 ■ Type: Near-field Probe ■ Size: Φ25mm Probe Head ■ Frequency Range: 100kHz to 50MHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

LF-B 3 (H field magnetic field probe)

You can approach difficult-to-access printed circuit boards, etc., that are sandwiched between components from above!

The "LF-B 3 Magnetic Field Probe" is a passive near-field probe, with the internal coil arranged perpendicular to the shaft. When the probe head is used vertically against the assembly or device being measured, accurate measurements can be obtained. This product detects magnetic field lines radiating at a 90° angle from the object being measured and does not detect magnetic field lines entering from the side. Langer's near-field probes are compact and very easy to use, and they are electrically well-shielded by a current-damping sheath. 【Specifications】 ■ Type: Near-field Probe ■ Size: Φ4mm Probe Head ■ Frequency Range: 100kHz to 50MHz ■ Connector: SMB male, Jack ■ Resolution: 2mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

LF-K 7 (H field magnetic field probe)

Half-circular magnetic field lines are generated along the edges of linear, rod-shaped components, cable connectors, and flat structural parts.

The "LF-K 7 Magnetic Field Probe" is a passive near-field probe that detects semicircular magnetic field lines using two coils. The probe functions like a coupling clamp. Unlike the "LF-U 5" probe, it does not detect magnetic field lines entering from the side. The magnetic field enters through the first coil, curves in a circular shape within the probe head, and detects the uneven magnetic field exiting through the second coil. It does not detect overlapping uniform magnetic fields. 【Specifications】 ■ Type: Near-field probe ■ Size: 6×10mm probe head ■ Frequency range: 100kHz to 50MHz ■ Connector: SMB male, Jack ■ Resolution: 5mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

SX-R 20-1 Set (Magnetic Field Probe)

It is also possible to detect the direction and distribution of the magnetic field in electronic assemblies!

The "SX-R 20-1 Set (Magnetic Field Probe)" includes a passive magnetic field probe for measuring high-frequency magnetic fields up to 20GHz during the development process, along with one dedicated cable. The probe head of the SX-R 20-1 can measure at positions close to electronic assemblies. It can inspect IC pins, conductive paths, components, and connectors, allowing for the identification of interference sources. [Set Contents] ■SX-R 20-1: H-Field Probe 1GHz to 20GHz ■SMA-SMA: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC countermeasure products

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

RF2 Set (Magnetic Field Probe)

Can be connected to a 50Ω input spectrum analyzer or oscilloscope!

The "RF2 Near-Field Probe Set" includes four passive magnetic field probes and one dedicated cable. It can measure electric and magnetic fields from 30MHz to 3GHz on electronic assemblies during the development process. The probe heads in this set can progressively identify the locations of RF magnetic field interference sources on electronic assemblies. 【Set Contents】 ■RF-R 400-1: H-Field Probe 30MHz to 3GHz ■RF-R 50-1: H-Field Probe 30MHz to 3GHz ■RF-U 5-2: H-Field Probe 30MHz to 3GHz ■RF-B 3-2: H-Field Probe 30MHz to 3GHz ■SMB-BNC: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC countermeasure products

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

XF-R 400-1 (H field magnetic field probe)

Same basic structure as the "XF-R 100-1" and "XF-R 3-2" probes!

The "XF-R 400-1 Magnetic Field Probe" is a passive near-field probe with a head size of 25mm in diameter. It has high sensitivity and is suitable for measurements within a maximum range of 10cm around assemblies and devices. The larger the tip diameter, the higher the sensitivity, allowing for the detection of magnetic fields over a wider area. Additionally, the XF series magnetic field probes come with a built-in 50Ω termination resistor. 【Specifications】 ■ Type: Near-field Probe ■ Size: Φ25mm Probe Head ■ Frequency Range: 30MHz to 6GHz ■ Connector: SMA female, Jack *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC countermeasure products

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

XF-B 3-1 (H field magnetic field probe)

Detecting magnetic field lines radiating at a 90° angle from the measurement target!

The 『XF-B 3-1』 magnetic field probe is a passive near-field probe. The internal coil is arranged perpendicular to the shaft, allowing for accurate measurements when the probe head is used vertically against the assembly or device being measured. For example, it can be approached from above to access difficult-to-reach printed circuit boards sandwiched between components. 【Specifications】 ■ Type: Near-field probe ■ Size: Φ4mm probe head ■ Frequency range: 30MHz to 6GHz ■ Connector: SMA female, Jack ■ Resolution: 2mm *For more details, please refer to the related links or feel free to contact us.

企業：テイエスエスジャパン
価格：Other

EMC/Static electricity measuring equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Magnetic Field Probe×テイエスエスジャパン - メーカー・企業と製品の一覧

Magnetic Field Probeの製品一覧